Tyree Oil, Inc.

Corporate Address:
1355 W 1st Avenue
Eugene, OR 97402
Mailing Address:
PO Box 2706
Eugene, OR 97402
Phone:
(541) 687-0076
Toll-Free:
Fax:
(541) 343-0552

Cardlock Fueling

Safety Requirements

HOW TO BEGIN FUELING

The first step!

  1. Shut off engine and extinguish all cigarettes.
  2. Insert your driver card into the card reader and remove immediately.
  3. If you are using a 2 card system, insert your vehicle card into the card reader and remove immediately.
  4. Enter your 4-digit personal Identification Number (P.I.N.) and press ENTER.
  5. If prompted to do so, enter your current odometer reading and press ENTER.
  6. If prompted to do so, enter any miscellaneous information and press ENTER.
  7. Enter the pump number and press ENTER.This activates the pump so that fueling can begin.
  8. Remove gas cap slowly and place nozzle deeply into the fuel tank neck.
  9. Activate the nozzle by engaging the lever on the dispenser. Then pull trigger and begin dispensing fuel.

The nozzle must be inserted deeply into the fuel tank neck and held during fueling. Optimum nozzle setting for speed of delivery is between 1/2 and 3/4 open; faster delivery may result in a spill.
If the nozzle is activated too quickly, a leak detector will automatically slow pumping to a trickle. Simply release the trigger on the nozzle and wait 10 seconds. Then pull trigger again, and pumping should be normal.


« More
^ Top